he/him. from the birdsite (@Andres4NY and before that @NEGreenways).
#Dad #NYC #Bikes #FreeTransit #SafeStreets #BanCars #Debian #FreeSoftware #ACAB #Vegetarian #WearAMask
My wife’s an #epidemiologist, so you’ll get some #COVID talk too.
Trans rights are human rights.
@meldrik They’re impossible to block based on IP ranges alone. It’s why all the FOSS git forges and bug trackers have started using stuff like anubis. But yes, I initially tried to block them (this was before anubis existed).
It was a few things that I had to take down; a gitweb instance with some of my own repos, for example. And a personal photo gallery. The scrapers would do pathological things like running repeated search queries for random email addresses or strings.
@pfr @nikodindon That assumes it won’t get worse, which I hope it does. AI companies have forced me to take down web stuff that I had running for almost 2 decades, because their scrapers are so aggressive.
@gblues If you use something like yggdrasil, you don’t need to bother w/ ssl certs. Just make sure your services are listening on the yggdrasil-specific IPv6 port only, and whenever you connect to one over plain http:// you’re guaranteed to have an encrypted, verified connection.
@lambalicious Syncthing is what I replaced seafile with, fwiw. Works great!
@lambalicious @jasonweiser Not sure seafile should be listed as an alternative. We couldn’t include it on Debian due to copyright sketchiness/plagerism…
@Used_Gate I suggest getting this in f-droid if you want to see more usage.
Also, it looks like the actual development happens in private and then is thrown over the fence; https://gitlab.com/here/_forawhile/onionphone/-/commit/2c4afc462a42852f0d54dda0b333db9019f3d69e
@tabular @Ek-Hou-Van-Braai They are lying. Debian supports Secure Boot and remains open.
Although “related platform integrity” stuff might be something they’re being forced to include by a government agency or paid to include by another company.
@myrmidex @superglue The fork is interesting. An earlier version forgot my navidrome server (and nuked my download cache), which was annoying; however, it’s gained some features that I really like. For example, when an album finishes it starts playing similar songs from other albums/artists. I didn’t think I would like this, but it ended up being pretty great (and it’s configurable if I need to turn it off). Very spotify-ish, but limited to stuff you have on your server.
@CmdrShepard49 @orsetto Also, don’t use hardware raid. If the controller ever fails, you lose all your data unless you can replace it with the same controller. If you do have a raid controller, you configure it to do JBOD so you can use software raid (or snapraid); at which point, you can do the same thing with consumer hardware.
@Fmstrat @veeesix The second, could you do raid across specific platters - yes and no. The drive firmware specifically hides the details of the underlying platter layout. But if you targeted a specific model, you could probably hack something together that would do raid across the platters. But given the answer to the first question, why would you?
@Fmstrat @veeesix Since there’s two very diffrent questions there… The first, “where do the failures happen?”: anywhere. It could be the controller dying (in which case the platters themselves are fine if you replace the board, but otherwise the whole thing is toast). It could be the head breaking. It could be issues with a specific platter. It could be something that affects _all_ the platters (like dust getting inside the sealed area). So basically, it very much depends.
@Zorque I’m saying that 14TB will only fit 280 (or more likely, less) of those ultra-hq movies, so 140TB (or, in the lead up to that, 100TB, since they’re talking about 5+ years or more before they even get close to 140TB) is reasonable for a 1,000-2,000 movie collection. Obviously I’m being loose with numbers, but the fact that one single movie can consume almost 80GB… well, you can start to understand consumer demand for 100+TB drives.
@Korkki @just_another_person I see 4k HDR blue ray movie rips these days on the order of 50GB (edit: eg, Eddington.2025.MULTi.VFF.2160p.DV.HDR.BluRay.REMUX.HEVC-[BATGirl]: 77.73G).
Which is too rich for my blood (I’m still watching on 1080p screens over here), but for someone with the right kind of home theater… that’s only ~280 movies on a 14TB drive. Lots of movie collections, even in the olden days of physical VHS and DVDs, span 1,000+ movies.
@SmoothLiquidation @Telorand They also claim up to 8x speed improvements with HAMR. Obviously that remains to be seen, but if they could roughly match capacity improvements, that would keep restriping in the same ballpark.
@dan @rimu Yep. For us, it was cheaper to use the VPS storage than S3 (at the time I took it over, in 2018). Amusingly, it was set up to use S3 for images but then mounted locally and served through the VPS’s web server, making it all painfully slow (the proper way would be to have the site provide links directly to the S3). By switching it to local storage, I cut hosting costs in half and also sped up the site by orders of magnitude.
@dan @goldensw The vast majority of traffic is going to be the first day or week that a new article is published, social media or whatever driving lots of traffic to that same article over and over. Loading the php interpreter each time, even if it’s reading cached data, *will* make the site fall over. Static files will not.
Though nowdays there’s stupid AI bots doing pathological stuff, so that may become an issue as well that requires some further adjustments.
@dan @goldensw Yes, this. I did almost exactly what you did (taking over maintenance of an older wordpress site used by a local news org), and it was in rough shape. The config is a bit crotchety (like most things wordpress these days), but we’re using WP Fastest Cache to create static html pages and a custom nginx configuration to read directly off those static pages (without hitting the php interpreter) for non-logged-in users. Basically try_files /…/cache/$uri, which falls back to php.
@illusionist At least with the demo that I’m looking at with the script to download, it gives both flatpak AND apt install commands, giving the user a choice. Maybe I’m looking at the wrong thing though?
@illusionist @henkster Firefox from apt and firefox from flatpak are not equivalent. The former goes through an extra process to remove non-free components.
deleted by creator